CVE-2022-30xxx records
Browse official CVE Program records with vulnerability descriptions, affected products, CVSS scores and source references. Browse by the year and numeric range in each CVE ID; publication and update dates appear on each record.
717 records · Page 6 of 8
Honeywell Experion LX through 2022-05-06 has Missing Authentication for a Critical Function. According to FSCT-2022-0055, there is a Honeywell Experion LX Control Data Access (CDA) EpicMo protocol with unauthenticated functionality issue. The affected components are characterized as: Honeywell Control Data Access (CDA) EpicMo (55565/TCP). The potential impact is: Firmware manipulation, Denial of s
UpdatedHoneywell Experion PKS Safety Manager 5.02 has Insufficient Verification of Data Authenticity. According to FSCT-2022-0054, there is a Honeywell Experion PKS Safety Manager unauthenticated firmware update issue. The affected components are characterized as: Firmware update functionality. The potential impact is: Firmware manipulation. The Honeywell Experion PKS Safety Manager utilizes the DCOM-232
UpdatedHoneywell Experion PKS Safety Manager (SM and FSC) through 2022-05-06 has Insufficient Verification of Data Authenticity. According to FSCT-2022-0053, there is a Honeywell Experion PKS Safety Manager insufficient logic security controls issue. The affected components are characterized as: Honeywell FSC runtime (FSC-CPU, QPP), Honeywell Safety Builder. The potential impact is: Remote Code Execution
UpdatedHoneywell Experion PKS Safety Manager 5.02 uses Hard-coded Credentials. According to FSCT-2022-0052, there is a Honeywell Experion PKS Safety Manager hardcoded credentials issue. The affected components are characterized as: POLO bootloader. The potential impact is: Manipulate firmware. The Honeywell Experion PKS Safety Manager utilizes the DCOM-232/485 serial interface for firmware management pur
UpdatedHoneywell Experion PKS Safety Manager through 2022-05-06 has Missing Authentication for a Critical Function. According to FSCT-2022-0051, there is a Honeywell Experion PKS Safety Manager multiple proprietary protocols with unauthenticated functionality issue. The affected components are characterized as: Honeywell Experion TCP (51000/TCP), Safety Builder (51010/TCP). The potential impact is: Manip
UpdatedThe Trend Controls IC protocol through 2022-05-06 allows Cleartext Transmission of Sensitive Information. According to FSCT-2022-0050, there is a Trend Controls Inter-Controller (IC) protocol cleartext transmission of credentials issue. The affected components are characterized as: Inter-Controller (IC) protocol (57612/UDP). The potential impact is: Compromise of credentials. Several Trend Control
Updated- CVE-2022-30311: FESTO: CECC-X-M1 and Servo Press Kit YJKP OS Command Injection vulnerability 9.8 Critical
In Festo Controller CECC-X-M1 product family in multiple versions, the http-endpoint "cecc-x-refresh-request" POST request doesn’t check for port syntax. This can result in unauthorized execution of system commands with root privileges due to improper access control command injection.
Updated - CVE-2022-30310: FESTO: CECC-X-M1 and Servo Press Kit YJKP OS Command Injection vulnerability 9.8 Critical
In Festo Controller CECC-X-M1 product family in multiple versions, the http-endpoint "cecc-x-acknerr-request" POST request doesn’t check for port syntax. This can result in unauthorized execution of system commands with root privileges due to improper access control command injection.
Updated - CVE-2022-30309: FESTO: CECC-X-M1 and Servo Press Kit YJKP OS Command Injection vulnerability 9.8 Critical
In Festo Controller CECC-X-M1 product family in multiple versions, the http-endpoint "cecc-x-web-viewer-request-off" POST request doesn’t check for port syntax. This can result in unauthorized execution of system commands with root privileges due to improper access control command injection.
Updated - CVE-2022-30308: FESTO: CECC-X-M1 and Servo Press Kit YJKP OS Command Injection vulnerability 9.8 Critical
In Festo Controller CECC-X-M1 product family in multiple versions, the http-endpoint "cecc-x-web-viewer-request-on" POST request doesn’t check for port syntax. This can result in unauthorized execution of system commands with root privileges due to improper access control command injection.
Updated A key management error vulnerability [CWE-320] affecting the RSA SSH host key in FortiOS 7.2.0 and below, 7.0.6 and below, 6.4.9 and below may allow an unauthenticated attacker to perform a man in the middle attack.
UpdatedA stack-based buffer overflow vulnerability [CWE-121] in the CA sign functionality of FortiWeb version 7.0.1 and below, 6.4 all versions, version 6.3.19 and below may allow an authenticated attacker to achieve arbitrary code execution via specifically crafted password.
UpdatedAn insufficient logging [CWE-778] vulnerability in FortiSandbox versions 4.0.0 to 4.0.2, 3.2.0 to 3.2.3 and 3.1.0 to 3.1.5 and FortiDeceptor versions 4.2.0, 4.1.0 through 4.1.1, 4.0.0 through 4.0.2, 3.3.0 through 3.3.3, 3.2.0 through 3.2.2,3.1.0 through 3.1.1 and 3.0.0 through 3.0.2 may allow a remote attacker to repeatedly enter incorrect credentials without causing a log entry, and with no limi
UpdatedAn improper neutralization of input during web page generation vulnerability [CWE-79] in FortiAnalyzer versions prior to 7.2.1, 7.0.4 and 6.4.8 may allow a remote unauthenticated attacker to perform a stored cross site scripting (XSS) attack via the URL parameter observed in the FortiWeb attack event logview in FortiAnalyzer.
UpdatedAn improper neutralization of special elements used in an os command ('OS Command Injection') [CWE-78] in FortiWeb 7.0.0 through 7.0.1, 6.3.0 through 6.3.19, 6.4 all versions may allow an authenticated attacker to execute arbitrary shell code as `root` user via crafted HTTP requests.
UpdatedMultiple relative path traversal vulnerabilities [CWE-23] in FortiDeceptor management interface 1.0.0 through 3.2.x, 3.3.0 through 3.3.2, 4.0.0 through 4.0.1 may allow a remote and authenticated attacker to retrieve and delete arbitrary files from the underlying filesystem via specially crafted web requests.
UpdatedA path traversal vulnerability [CWE-22] in FortiAP-U CLI 6.2.0 through 6.2.3, 6.0.0 through 6.0.4, 5.4.0 through 5.4.6 may allow an admin user to delete and access unauthorized files and data via specifically crafted CLI commands.
UpdatedA relative path traversal vulnerability [CWE-23] in FortiWeb 7.0.0 through 7.0.1, 6.3.6 through 6.3.18, 6.4 all versions may allow an authenticated attacker to obtain unauthorized access to files and data via specifically crafted HTTP GET requests.
UpdatedA path traversal vulnerability [CWE-23] in the API of FortiWeb 7.0.0 through 7.0.1, 6.3.0 through 6.3.19, 6.4 all versions, 6.2 all versions, 6.1 all versions, 6.0 all versions may allow an authenticated attacker to retrieve specific parts of files from the underlying file system via specially crafted web requests.
UpdatedAn improper privilege management vulnerability [CWE-269] in Fortinet FortiSOAR before 7.2.1 allows a GUI user who has already found a way to modify system files (via another, unrelated and hypothetical exploit) to execute arbitrary Python commands as root.
UpdatedCross-site scripting in the Intel(R) EMA software before version 1.8.0 may allow a privileged user to potentially enable escalation of privilege via local access.
UpdatedInsufficiently protected credentials in the Intel(R) Datacenter Group Event iOS application, all versions, may allow an unauthenticated user to potentially enable information disclosure via network access.
UpdateduClibc-ng through 1.0.40 and uClibc through 0.9.33.2 use predictable DNS transaction IDs that may lead to DNS cache poisoning. This is related to a reset of a value to 0x2.
UpdatedDO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: CVE-2022-30293. Reason: This candidate is a duplicate of CVE-2022-30293. Notes: All CVE users should reference CVE-2022-30293 instead of this candidate. All references and descriptions in this candidate have been removed to prevent accidental usage
Updated · Rejected recordIn WebKitGTK through 2.36.0 (and WPE WebKit), there is a heap-based buffer overflow in WebCore::TextureMapperLayer::setContentsLayer in WebCore/platform/graphics/texmap/TextureMapperLayer.cpp.
UpdatedHeap-based buffer overflow in sqbaselib.cpp in SQUIRREL 3.2 due to lack of a certain sq_reservestack call.
UpdatedIn OpenCTI through 5.2.4, a broken access control vulnerability has been identified in the profile endpoint. An attacker can abuse the identified vulnerability in order to arbitrarily change their registered e-mail address as well as their API key, even though such action is not possible through the interface, legitimately.
UpdatedA stored Cross-site Scripting (XSS) vulnerability was identified in the Data Import functionality of OpenCTI through 5.2.4. An attacker can abuse the vulnerability to upload a malicious file that will then be executed by a victim when they open the file location.
UpdatedAgoo before 2.14.3 does not reject GraphQL fragment spreads that form cycles, leading to an application crash. NOTE: the vendor has disputed this on the grounds that it is not the server's responsibility to "enforce all the various ways a developer could write code with logic errors.
UpdatedHorde Groupware Webmail Edition through 5.2.22 allows a reflection injection attack through which an attacker can instantiate a driver class. This then leads to arbitrary deserialization of PHP objects.
Updatedpyscriptjs (aka PyScript Demonstrator) in PyScript through 2022-05-04 allows a remote user to read Python source code.
UpdatedIn Quest KACE Systems Management Appliance (SMA) through 12.0, a hash collision is possible during authentication. This may allow authentication with invalid credentials.
UpdatedIn the python-libnmap package through 0.7.2 for Python, remote command execution can occur (if used in a client application that does not validate arguments). NOTE: the vendor believes it would be unrealistic for an application to call NmapProcess with arguments taken from input data that arrived over an untrusted network, and thus the CVSS score corresponds to an unrealistic use case. None of the
UpdatedIn UsbCoreDxe, tampering with the contents of the USB working buffer using DMA while certain USB transactions are in process leads to a TOCTOU problem that could be used by an attacker to cause SMRAM corruption and escalation of privileges The UsbCoreDxe module creates a working buffer for USB transactions outside of SMRAM. The code which uses can be inside of SMM, making the working buffer untrus
Updated/SecurityManagement/html/createuser.jsf in Nokia NetAct 22 allows CSRF. A remote attacker is able to create users with arbitrary privileges, even administrative privileges. The application (even if it implements a CSRF token for the random GET request) does not ever verify a CSRF token. With a little help of social engineering/phishing (such as sending a link via email or chat), an attacker may tr
UpdatedAn issue was discovered in Stormshield Network Security (SNS) 4.3.x before 4.3.8. The event logging of the ASQ sofbus lacbus plugin triggers the dereferencing of a NULL pointer, leading to a crash of SNS. An attacker could exploit this vulnerability via forged sofbus lacbus traffic to cause a firmware crash.
UpdatedA vulnerability in Black Duck Hub’s embedded MadCap Flare documentation files could allow an unauthenticated remote attacker to conduct a cross-site scripting attack. The vulnerability is due to improper validation of user-supplied input to MadCap Flare's framework embedded within Black Duck Hub's Help Documentation to supply content. An attacker could exploit this vulnerability by convincing a us
UpdatedBD Synapsys™, versions 4.20, 4.20 SR1, and 4.30, contain an insufficient session expiration vulnerability. If exploited, threat actors may be able to access, modify or delete sensitive information, including electronic protected health information (ePHI), protected health information (PHI) and personally identifiable information (PII).
UpdatedThe Motorola MOSCAD and ACE line of RTUs through 2022-05-02 omit an authentication requirement. They feature IP Gateway modules which allow for interfacing between Motorola Data Link Communication (MDLC) networks (potentially over a variety of serial, RF and/or Ethernet links) and TCP/IP networks. Communication with RTUs behind the gateway is done by means of the proprietary IPGW protocol (5001/TC
UpdatedThe Motorola MOSCAD Toolbox software through 2022-05-02 relies on a cleartext password. It utilizes an MDLC driver to communicate with MOSCAD/ACE RTUs for engineering purposes. Access to these communications is protected by a password stored in cleartext in the wmdlcdrv.ini driver configuration file. In addition, this password is used for access control to MOSCAD/STS projects protected with the Le
UpdatedThe Motorola ACE1000 RTU through 2022-05-02 uses ECB encryption unsafely. It can communicate with an XRT LAN-to-radio gateway by means of an embedded client. Credentials for accessing this gateway are stored after being encrypted with the Tiny Encryption Algorithm (TEA) in ECB mode using a hardcoded key. Similarly, the ACE1000 RTU can route MDLC traffic over Extended Command and Management Protoco
UpdatedThe Motorola MDLC protocol through 2022-05-02 mishandles message integrity. It supports three security modes: Plain, Legacy Encryption, and New Encryption. In Legacy Encryption mode, traffic is encrypted via the Tiny Encryption Algorithm (TEA) block-cipher in ECB mode. This mode of operation does not offer message integrity and offers reduced confidentiality above the block level, as demonstrated
UpdatedThe Motorola ACE1000 RTU through 2022-05-02 mishandles firmware integrity. It utilizes either the STS software suite or ACE1000 Easy Configurator for performing firmware updates. In case of the Easy Configurator, firmware updates are performed through access to the Web UI where file system, kernel, package, bundle, or application images can be installed. Firmware updates for the Front End Processo
UpdatedThe Motorola ACE1000 RTU through 2022-05-02 ships with a hardcoded SSH private key and initialization scripts (such as /etc/init.d/sshd_service) only generate a new key if no private-key file exists. Thus, this hardcoded key is likely to be used by default.
UpdatedThe Motorola ACE1000 RTU through 2022-05-02 has default credentials. It exposes an SSH interface on port 22/TCP. This interface is used for remote maintenance and for SFTP file-transfer operations that are part of engineering software functionality. Access to this interface is controlled by 5 preconfigured accounts (root, abuilder, acelogin, cappl, ace), all of which come with default credentials.
UpdatedMotorola ACE1000 RTUs through 2022-05-02 mishandle application integrity. They allow for custom application installation via either STS software, the C toolkit, or the ACE1000 Easy Configurator. In the case of the Easy Configurator, application images (as PLX/DAT/APP/CRC files) are uploaded via the Web UI. In case of the C toolkit, they are transferred and installed using SFTP/SSH. In each case, a
UpdatedThe Emerson ROC and FloBoss RTU product lines through 2022-05-02 perform insecure filesystem operations. They utilize the ROC protocol (4000/TCP, 5000/TCP) for communications between a master terminal and RTUs. Opcode 203 of this protocol allows a master terminal to transfer files to and from the flash filesystem and carrying out arbitrary file and directory read, write, and delete operations.
UpdatedThe Emerson ControlWave 'Next Generation' RTUs through 2022-05-02 mishandle firmware integrity. They utilize the BSAP-IP protocol to transmit firmware updates. Firmware updates are supplied as CAB archive files containing a binary firmware image. In all cases, firmware images were found to have no authentication (in the form of firmware signing) and only relied on insecure checksums for regular in
UpdatedEmerson DeltaV Distributed Control System (DCS) has insufficient verification of firmware integrity (an inadequate checksum approach, and no signature). This affects versions before 14.3 of DeltaV M-series, DeltaV S-series, DeltaV P-series, DeltaV SIS, and DeltaV CIOC/EIOC/WIOC IO cards.
UpdatedAn issue was discovered in Technitium DNS Server through 8.0.2 that allows variant V2 of unintended domain name resolution. A revoked domain name can still be resolvable for a long time, including expired domains and taken-down malicious domains. The effects of an exploit would be widespread and highly impactful, because the exploitation conforms to de facto DNS specifications and operational prac
UpdatedAn issue was discovered in Technitium DNS Server through 8.0.2 that allows variant V1 of unintended domain name resolution. A revoked domain name can still be resolvable for a long time, including expired domains and taken-down malicious domains. The effects of an exploit would be widespread and highly impactful, because the exploitation conforms to de facto DNS specifications and operational prac
UpdatedAn issue was discovered in MaraDNS Deadwood through 3.5.0021 that allows variant V1 of unintended domain name resolution. A revoked domain name can still be resolvable for a long time, including expired domains and taken-down malicious domains. The effects of an exploit would be widespread and highly impactful, because the exploitation conforms to de facto DNS specifications and operational practi
UpdatedHoneywell Alerton Compass Software 1.6.5 allows unauthenticated configuration changes from remote users. This enables configuration data to be stored on the controller and then implemented. A user with malicious intent can send a crafted packet to change the controller configuration without the knowledge of other users, altering the controller's function capabilities. The changed configuration is
UpdatedHoneywell Alerton Ascent Control Module (ACM) through 2022-05-04 allows unauthenticated programming writes from remote users. This enables code to be store on the controller and then run without verification. A user with malicious intent can send a crafted packet to change and/or stop the program without the knowledge of other users, altering the controller's function. After the programming change
UpdatedHoneywell Alerton Visual Logic through 2022-05-04 allows unauthenticated programming writes from remote users. This enables code to be stored on the controller and then run without verification. A user with malicious intent can send a crafted packet to change and/or stop the program without the knowledge of other users, altering the controller's function. After the programming change, the program
UpdatedHoneywell Alerton Ascent Control Module (ACM) through 2022-05-04 allows unauthenticated configuration changes from remote users. This enables configuration data to be stored on the controller and then implemented. A user with malicious intent can send a crafted packet to change the controller configuration without the knowledge of other users, altering the controller's function capabilities. The c
UpdatedThe jquery.json-viewer library through 1.4.0 for Node.js does not properly escape characters such as < in a JSON object, as demonstrated by a SCRIPT element.
UpdatedAn argument injection vulnerability in the browser-based authentication component of the Magnitude Simba Amazon Redshift JDBC Driver 1.2.40 through 1.2.55 may allow a local user to execute code. NOTE: this is different from CVE-2022-29972.
UpdatedAn argument injection vulnerability in the browser-based authentication component of the Magnitude Simba Amazon Athena JDBC Driver 2.0.25 through 2.0.28 may allow a local user to execute code. NOTE: this is different from CVE-2022-29971.
UpdatedA CWE-287: Improper Authentication vulnerability exists that could allow an attacker to take over the admin account when an attacker hijacks a session. Affected Products: Wiser Smart, EER21000 & EER21001 (V4.5 and prior)
UpdatedA CWE-311: Missing Encryption of Sensitive Data vulnerability exists that could allow authentication credentials to be recovered when an attacker breaks the encoding. Affected Products: Wiser Smart, EER21000 & EER21001 (V4.5 and prior)
UpdatedA CWE-669: Incorrect Resource Transfer Between Spheres vulnerability exists that could allow unauthorized access when an attacker uses cross-domain attacks. Affected Products: Wiser Smart, EER21000 & EER21001 (V4.5 and prior)
UpdatedA CWE-307: Improper Restriction of Excessive Authentication Attempts vulnerability exists that could allow unauthorized access when an attacker uses brute force. Affected Products: Wiser Smart, EER21000 & EER21001 (V4.5 and prior)
UpdatedA CWE-798: Use of Hard-coded Credentials vulnerability exists that could allow arbitrary code to be executed when root level access is obtained. Affected Products: Wiser Smart, EER21000 & EER21001 (V4.5 and prior)
UpdatedA CWE-20: Improper Input Validation vulnerability exists that could allow the product to be maliciously manipulated when the user is tricked into performing certain actions on a webpage. Affected Products: Wiser Smart, EER21000 & EER21001 (V4.5 and prior)
UpdatedA CWE-20: Improper Input Validation vulnerability exists that could cause potential remote code execution when an attacker is able to intercept and modify a request on the same network or has configuration access to an ION device on the network. Affected Products: Wiser Smart, EER21000 & EER21001 (V4.5 and prior)
UpdatedA vulnerability has been identified in SICAM GridEdge (Classic) (All versions < V2.6.6). The affected application discloses password hashes of other users upon request. This could allow an authenticated user to retrieve another user's password hash.
UpdatedA vulnerability has been identified in SICAM GridEdge (Classic) (All versions < V2.6.6). The affected application does not require authenticated access for privileged functions. This could allow an unauthenticated attacker to create a new user with administrative permissions.
UpdatedA vulnerability has been identified in SICAM GridEdge (Classic) (All versions < V2.6.6). The affected application does not require authenticated access for privileged functions. This could allow an unauthenticated attacker to change data of a user, such as credentials, in case that user's id is known.
UpdatedA vulnerability has been identified in SICAM GridEdge (Classic) (All versions < V2.6.6). The affected software does not apply cross-origin resource sharing (CORS) restrictions for critical operations. In case an attacker tricks a legitimate user into accessing a special resource a malicious request could be executed.
UpdatedWindows Print Spooler Elevation of Privilege Vulnerability
Updated- CVE-2022-30225: Windows Media Player Network Sharing Service Elevation of Privilege Vulnerability 7.1 High
Windows Media Player Network Sharing Service Elevation of Privilege Vulnerability
Updated - CVE-2022-30224: Windows Advanced Local Procedure Call (ALPC) Elevation of Privilege Vulnerability 7.0 High
Windows Advanced Local Procedure Call (ALPC) Elevation of Privilege Vulnerability
Updated Windows Hyper-V Information Disclosure Vulnerability
UpdatedWindows Shell Remote Code Execution Vulnerability
UpdatedWindows Graphics Component Remote Code Execution Vulnerability
UpdatedWindows Common Log File System Driver Elevation of Privilege Vulnerability
UpdatedWindows Server Service Tampering Vulnerability
UpdatedActive Directory Federation Services Elevation of Privilege Vulnerability
UpdatedWindows DNS Server Remote Code Execution Vulnerability
UpdatedWindows GDI+ Information Disclosure Vulnerability
Updated- CVE-2022-30212: Windows Connected Devices Platform Service Information Disclosure Vulnerability 4.7 Medium
Windows Connected Devices Platform Service Information Disclosure Vulnerability
Updated - CVE-2022-30211: Windows Layer 2 Tunneling Protocol (L2TP) Remote Code Execution Vulnerability 7.5 High
Windows Layer 2 Tunneling Protocol (L2TP) Remote Code Execution Vulnerability
Updated Windows IIS Server Elevation of Privilege Vulnerability
UpdatedWindows Security Account Manager (SAM) Denial of Service Vulnerability
UpdatedWindows Print Spooler Elevation of Privilege Vulnerability
UpdatedWindows Group Policy Elevation of Privilege Vulnerability
UpdatedWindows Boot Manager Security Feature Bypass Vulnerability
Updated- CVE-2022-30202: Windows Advanced Local Procedure Call (ALPC) Elevation of Privilege Vulnerability 7.0 High
Windows Advanced Local Procedure Call (ALPC) Elevation of Privilege Vulnerability
Updated Windows Lightweight Directory Access Protocol (LDAP) Remote Code Execution Vulnerability
Updated- CVE-2022-30198: Windows Point-to-Point Tunneling Protocol Remote Code Execution Vulnerability 8.1 High
Windows Point-to-Point Tunneling Protocol Remote Code Execution Vulnerability
Updated Windows Kernel Information Disclosure Vulnerability
UpdatedWindows Secure Channel Denial of Service Vulnerability
UpdatedWindows WebBrowser Control Remote Code Execution Vulnerability
UpdatedAV1 Video Extension Remote Code Execution Vulnerability
UpdatedMicrosoft Edge (Chromium-based) Elevation of Privilege Vulnerability
Updated- CVE-2022-30190: Microsoft Windows Support Diagnostic Tool (MSDT) Remote Code Execution Vulnerability 7.8 High
A remote code execution vulnerability exists when MSDT is called using the URL protocol from a calling application such as Word. An attacker who successfully exploits this vulnerability can run arbitrary code with the privileges of the calling application. The attacker can then install programs, view, change, or delete data, or create new accounts in the context allowed by the user’s rights. Pleas
Updated - CVE-2022-30189: Windows Autopilot Device Management and Enrollment Client Spoofing Vulnerability 6.5 Medium
Windows Autopilot Device Management and Enrollment Client Spoofing Vulnerability
Updated HEVC Video Extensions Remote Code Execution Vulnerability
UpdatedAzure Storage Library Information Disclosure Vulnerability
Updated