CVE-2021-28xxx records
Browse official CVE Program records with vulnerability descriptions, affected products, CVSS scores and source references. Browse by the year and numeric range in each CVE ID; publication and update dates appear on each record.
613 records · Page 2 of 7
Insecure storage of sensitive information has been reported to affect QNAP NAS running myQNAPcloud Link. If exploited, this vulnerability allows remote attackers to read sensitive information by accessing the unrestricted storage mechanism. This issue affects: QNAP Systems Inc. myQNAPcloud Link versions prior to 2.2.21 on QTS 4.5.3; versions prior to 2.2.21 on QuTS hero h4.5.2; versions prior to 2
UpdatedAn improper access control vulnerability has been reported to affect QNAP NAS. If exploited, this vulnerability allows remote attackers to compromise the security of the software. This issue affects: QNAP Systems Inc. Helpdesk versions prior to 3.0.4.
Updated- CVE-2021-28813: Insufficiently Protected Credentials Vulnerability in QSW-M2116P-2T2S and QuNetSwitch 9.6 Critical
A vulnerability involving insecure storage of sensitive information has been reported to affect QSW-M2116P-2T2S and QNAP switches running QuNetSwitch. If exploited, this vulnerability allows remote attackers to read sensitive information by accessing the unrestricted storage mechanism.We have already fixed this vulnerability in the following versions: QSW-M2116P-2T2S 1.0.6 build 210713 and later Q
Updated A command injection vulnerability has been reported to affect certain versions of Video Station. If exploited, this vulnerability allows remote attackers to execute arbitrary commands. This issue affects: QNAP Systems Inc. Video Station versions prior to 5.5.4 on QTS 4.5.2; versions prior to 5.5.4 on QuTS hero h4.5.2; versions prior to 5.5.4 on QuTScloud c4.5.4. This issue does not affect: QNAP Sy
UpdatedIf exploited, this command injection vulnerability could allow remote attackers to run arbitrary commands. Roon Labs has already fixed this vulnerability in the following versions: Roon Server 2021-05-18 and later
UpdatedIf exploited, this vulnerability allows an attacker to access resources which are not otherwise accessible without proper authentication. Roon Labs has already fixed this vulnerability in the following versions: Roon Server 2021-05-18 and later
UpdatedAn improper access control vulnerability has been reported to affect certain legacy versions of HBS 3. If exploited, this vulnerability allows attackers to compromise the security of the operating system.QNAP have already fixed this vulnerability in the following versions of HBS 3: QTS 4.3.6: HBS 3 v3.0.210507 and later QTS 4.3.4: HBS 3 v3.0.210506 and later QTS 4.3.3: HBS 3 v3.0.210506 and later
UpdatedA post-authentication reflected XSS vulnerability has been reported to affect QNAP NAS running Q’center. If exploited, this vulnerability allows remote attackers to inject malicious code. QNAP have already fixed this vulnerability in the following versions of Q’center: QTS 4.5.3: Q’center v1.12.1012 and later QTS 4.3.6: Q’center v1.10.1004 and later QTS 4.3.3: Q’center v1.10.1004 and later QuTS he
UpdatedA DOM-based XSS vulnerability has been reported to affect QNAP NAS running QTS and QuTS hero. If exploited, this vulnerability allows attackers to inject malicious code. This issue affects: QNAP Systems Inc. QTS versions prior to 4.5.3.1652 Build 20210428. QNAP Systems Inc. QuTS hero versions prior to h4.5.2.1638 Build 20210414. QNAP Systems Inc. QuTScloud versions prior to c4.5.5.1656 Build 20210
UpdatedInclusion of sensitive information in the source code has been reported to affect certain QNAP switches running QSS. If exploited, this vulnerability allows attackers to read application data. This issue affects: QNAP Systems Inc. QSS versions prior to 1.0.3 build 20210505 on QSW-M2108-2C; versions prior to 1.0.3 build 20210505 on QSW-M2108-2S; versions prior to 1.0.3 build 20210505 on QSW-M2108R-
UpdatedA command injection vulnerabilities have been reported to affect QTS and QuTS hero. If exploited, this vulnerability allows attackers to execute arbitrary commands in a compromised application. This issue affects: QNAP Systems Inc. QTS versions prior to 4.5.1.1540 build 20210107. QNAP Systems Inc. QuTS hero versions prior to h4.5.1.1582 build 20210217.
UpdatedThis issue affects: QNAP Systems Inc. Q'center versions prior to 1.11.1004.
UpdatedA command injection vulnerabilities have been reported to affect QTS and QuTS hero. If exploited, this vulnerability allows attackers to execute arbitrary commands in a compromised application. This issue affects: QNAP Systems Inc. QTS versions prior to 4.5.1.1540 build 20210107. QNAP Systems Inc. QuTS hero versions prior to h4.5.1.1582 build 20210217.
UpdatedAn out-of-bounds read vulnerability has been reported to affect certain QNAP switches running QSS. If exploited, this vulnerability allows attackers to read sensitive information on the system. This issue affects: QNAP Systems Inc. QSS versions prior to 1.0.2 build 20210122 on QSW-M2108-2C; versions prior to 1.0.2 build 20210122 on QSW-M2108-2S; versions prior to 1.0.2 build 20210122 on QSW-M2108R
UpdatedA command injection vulnerability has been reported to affect QNAP NAS running legacy versions of QTS. If exploited, this vulnerability allows attackers to execute arbitrary commands in a compromised application. This issue affects: QNAP Systems Inc. QTS versions prior to 4.3.6.1663 Build 20210504; versions prior to 4.3.3.1624 Build 20210416. This issue does not affect: QNAP Systems Inc. QTS 4.5.3
UpdatedAn improper authorization vulnerability has been reported to affect QNAP NAS running HBS 3 (Hybrid Backup Sync. ) If exploited, the vulnerability allows remote attackers to log in to a device. This issue affects: QNAP Systems Inc. HBS 3 versions prior to v16.0.0415 on QTS 4.5.2; versions prior to v3.0.210412 on QTS 4.3.6; versions prior to v3.0.210411 on QTS 4.3.4; versions prior to v3.0.210411 on
UpdatedA relative path traversal vulnerability has been reported to affect QNAP NAS running QTS and QuTS hero. If exploited, this vulnerability allows attackers to modify files that impact system integrity. QNAP have already fixed this vulnerability in the following versions: QTS 4.5.2.1630 Build 20210406 and later QTS 4.3.6.1663 Build 20210504 and later QTS 4.3.3.1624 Build 20210416 and later QuTS hero
UpdatedA stack-based buffer overflow vulnerability has been reported to affect QNAP NAS devices running Surveillance Station. If exploited, this vulnerability allows attackers to execute arbitrary code. QNAP have already fixed this vulnerability in the following versions: Surveillance Station 5.1.5.4.3 (and later) for ARM CPU NAS (64bit OS) and x86 CPU NAS (64bit OS) Surveillance Station 5.1.5.3.3 (and l
UpdatedIncrements Qiita::Markdown before 0.33.0 allows XSS in transformers.
UpdatedThe unofficial ShellCheck extension before 0.13.4 for Visual Studio Code mishandles shellcheck.executablePath.
Updatedvscode-restructuredtext before 146.0.0 contains an incorrect access control vulnerability, where a crafted project folder could execute arbitrary binaries via crafted workspace configuration.
UpdatedThe unofficial Swift Development Environment extension before 2.12.1 for Visual Studio Code allows remote attackers to execute arbitrary code by constructing a malicious workspace with a crafted sourcekit-lsp.serverPath, swift.languageServerPath, swift.path.sourcekite, swift.path.sourcekiteDockerMode, swift.path.swift_driver_bin, or swift.path.shell configuration value that triggers execution upon
UpdatedThe unofficial SwiftFormat extension before 1.3.7 for Visual Studio Code allows remote attackers to execute arbitrary code by constructing a malicious workspace with a crafted swiftformat.path configuration value that triggers execution upon opening the workspace.
UpdatedThe unofficial SwiftLint extension before 1.4.5 for Visual Studio Code allows remote attackers to execute arbitrary code by constructing a malicious workspace with a crafted swiftlint.path configuration value that triggers execution upon opening the workspace.
UpdatedThe unofficial apple/swift-format extension before 1.1.2 for Visual Studio Code allows remote attackers to execute arbitrary code by constructing a malicious workspace with a crafted apple-swift-format.path configuration value that triggers execution upon opening the workspace.
UpdatedDO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: CVE-2021-28372. Reason: This candidate is a duplicate of CVE-2021-28372. A typo caused the wrong ID to be used. Notes: All CVE users should reference CVE-2021-28372 instead of this candidate. All references and descriptions in this candidate have been removed to prevent accidental usage
Updated · Rejected recordGuest can force Linux netback driver to hog large amounts of kernel memory T[his CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] Incoming data packets for a guest in the Linux kernel's netback driver are buffered until the guest is ready to process them. There are some measures taken for avoiding to pile up too much data, b
UpdatedGuest can force Linux netback driver to hog large amounts of kernel memory T[his CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] Incoming data packets for a guest in the Linux kernel's netback driver are buffered until the guest is ready to process them. There are some measures taken for avoiding to pile up too much data, b
UpdatedRogue backends can cause DoS of guests via high frequency events T[his CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] Xen offers the ability to run PV backends in regular unprivileged guests, typically referred to as "driver domains". Running PV backends in driver domains has one primary security advantage: if a driver dom
UpdatedRogue backends can cause DoS of guests via high frequency events T[his CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] Xen offers the ability to run PV backends in regular unprivileged guests, typically referred to as "driver domains". Running PV backends in driver domains has one primary security advantage: if a driver dom
UpdatedRogue backends can cause DoS of guests via high frequency events T[his CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] Xen offers the ability to run PV backends in regular unprivileged guests, typically referred to as "driver domains". Running PV backends in driver domains has one primary security advantage: if a driver dom
Updatedcertain VT-d IOMMUs may not work in shared page table mode For efficiency reasons, address translation control structures (page tables) may (and, on suitable hardware, by default will) be shared between CPUs, for second-level translation (EPT), and IOMMUs. These page tables are presently set up to always be 4 levels deep. However, an IOMMU may require the use of just 3 page table levels. In such a
Updatedissues with partially successful P2M updates on x86 T[his CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] x86 HVM and PVH guests may be started in populate-on-demand (PoD) mode, to provide a way for them to later easily have more memory assigned. Guests are permitted to control certain P2M aspects of individual pages via hy
UpdatedPoD operations on misaligned GFNs T[his CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] x86 HVM and PVH guests may be started in populate-on-demand (PoD) mode, to provide a way for them to later easily have more memory assigned. Guests are permitted to control certain P2M aspects of individual pages via hypercalls. These hy
UpdatedPoD operations on misaligned GFNs T[his CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] x86 HVM and PVH guests may be started in populate-on-demand (PoD) mode, to provide a way for them to later easily have more memory assigned. Guests are permitted to control certain P2M aspects of individual pages via hypercalls. These hy
Updatedguests may exceed their designated memory limit When a guest is permitted to have close to 16TiB of memory, it may be able to issue hypercalls to increase its memory allocation beyond the administrator established limit. This is a result of a calculation done with 32-bit precision, which may overflow. It would then only be the overflowed (and hence small) number which gets compared against the est
Updatedissues with partially successful P2M updates on x86 T[his CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] x86 HVM and PVH guests may be started in populate-on-demand (PoD) mode, to provide a way for them to later easily have more memory assigned. Guests are permitted to control certain P2M aspects of individual pages via hy
UpdatedPoD operations on misaligned GFNs T[his CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] x86 HVM and PVH guests may be started in populate-on-demand (PoD) mode, to provide a way for them to later easily have more memory assigned. Guests are permitted to control certain P2M aspects of individual pages via hypercalls. These hy
Updatedgrant table v2 status pages may remain accessible after de-allocation (take two) Guest get permitted access to certain Xen-owned pages of memory. The majority of such pages remain allocated / associated with a guest for its entire lifetime. Grant table v2 status pages, however, get de-allocated when a guest switched (back) from v2 to v1. The freeing of such pages requires that the hypervisor know
UpdatedPCI devices with RMRRs not deassigned correctly Certain PCI devices in a system might be assigned Reserved Memory Regions (specified via Reserved Memory Region Reporting, "RMRR"). These are typically used for platform tasks such as legacy USB emulation. If such a device is passed through to a guest, then on guest shutdown the device is not properly deassigned. The IOMMU configuration for these dev
UpdatedAnother race in XENMAPSPACE_grant_table handling Guests are permitted access to certain Xen-owned pages of memory. The majority of such pages remain allocated / associated with a guest for its entire lifetime. Grant table v2 status pages, however, are de-allocated when a guest switches (back) from v2 to v1. Freeing such pages requires that the hypervisor enforce that no parallel request can result
Updatedxen/arm: No memory limit for dom0less domUs The dom0less feature allows an administrator to create multiple unprivileged domains directly from Xen. Unfortunately, the memory limit from them is not set. This allow a domain to allocate memory beyond what an administrator originally configured.
Updatedinadequate grant-v2 status frames array bounds check The v2 grant table interface separates grant attributes from grant status. That is, when operating in this mode, a guest has two tables. As a result, guests also need to be able to retrieve the addresses that the new status tracking table can be accessed through. For 32-bit guests on x86, translation of requests has to occur because the interfac
Updatedlong running loops in grant table handling In order to properly monitor resource use, Xen maintains information on the grant mappings a domain may create to map grants offered by other domains. In the process of carrying out certain actions, Xen would iterate over all such entries, including ones which aren't in use anymore and some which may have been created but never used. If the number of entr
Updatedgrant table v2 status pages may remain accessible after de-allocation Guest get permitted access to certain Xen-owned pages of memory. The majority of such pages remain allocated / associated with a guest for its entire lifetime. Grant table v2 status pages, however, get de-allocated when a guest switched (back) from v2 to v1. The freeing of such pages requires that the hypervisor know where in th
UpdatedIOMMU page mapping issues on x86 T[his CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] Both AMD and Intel allow ACPI tables to specify regions of memory which should be left untranslated, which typically means these addresses should pass the translation phase unaltered. While these are typically device specific ACPI propert
UpdatedIOMMU page mapping issues on x86 T[his CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] Both AMD and Intel allow ACPI tables to specify regions of memory which should be left untranslated, which typically means these addresses should pass the translation phase unaltered. While these are typically device specific ACPI propert
UpdatedIOMMU page mapping issues on x86 T[his CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] Both AMD and Intel allow ACPI tables to specify regions of memory which should be left untranslated, which typically means these addresses should pass the translation phase unaltered. While these are typically device specific ACPI propert
Updatedxen/arm: Boot modules are not scrubbed The bootloader will load boot modules (e.g. kernel, initramfs...) in a temporary area before they are copied by Xen to each domain memory. To ensure sensitive data is not leaked from the modules, Xen must "scrub" them before handing the page over to the allocator. Unfortunately, it was discovered that modules will not be scrubbed on Arm.
Updatedinappropriate x86 IOMMU timeout detection / handling IOMMUs process commands issued to them in parallel with the operation of the CPU(s) issuing such commands. In the current implementation in Xen, asynchronous notification of the completion of such commands is not used. Instead, the issuing CPU spin-waits for the completion of the most recently issued command(s). Some of these waiting loops try t
UpdatedGuest triggered use-after-free in Linux xen-netback A malicious or buggy network PV frontend can force Linux netback to disable the interface and terminate the receive kernel thread associated with queue 0 in response to the frontend sending a malformed packet. Such kernel thread termination will lead to a use-after-free in Linux netback when the backend is destroyed, as the kernel thread associat
Updatedx86: TSX Async Abort protections not restored after S3 This issue relates to the TSX Async Abort speculative security vulnerability. Please see https://xenbits.xen.org/xsa/advisory-305.html for details. Mitigating TAA by disabling TSX (the default and preferred option) requires selecting a non-default setting in MSR_TSX_CTRL. This setting isn't restored after S3 suspend.
Updatedx86: Speculative vulnerabilities with bare (non-shim) 32-bit PV guests 32-bit x86 PV guest kernels run in ring 1. At the time when Xen was developed, this area of the i386 architecture was rarely used, which is why Xen was able to use it to implement paravirtualisation, Xen's novel approach to virtualization. In AMD64, Xen had to use a different implementation approach, so Xen does not use ring 1
UpdatedThe fix for XSA-365 includes initialization of pointers such that subsequent cleanup code wouldn't use uninitialized or stale values. This initialization went too far and may under certain conditions also overwrite pointers which are in need of cleaning up. The lack of cleanup would result in leaking persistent grants. The leak in turn would prevent fully cleaning up after a respective guest has d
UpdatedHVM soft-reset crashes toolstack libxl requires all data structures passed across its public interface to be initialized before use and disposed of afterwards by calling a specific set of functions. Many internal data structures also require this initialize / dispose discipline, but not all of them. When the "soft reset" feature was implemented, the libxl__domain_suspend_state structure didn't req
UpdatedAsIO2_64.sys and AsIO2_32.sys in ASUS GPUTweak II before 2.3.0.3 allow low-privileged users to trigger a stack-based buffer overflow. This could enable low-privileged users to achieve Denial of Service via a DeviceIoControl.
UpdatedAsIO2_64.sys and AsIO2_32.sys in ASUS GPUTweak II before 2.3.0.3 allow low-privileged users to interact directly with physical memory (by calling one of several driver routines that map physical memory into the virtual address space of the calling process) and to interact with MSR registers. This could enable low-privileged users to achieve NT AUTHORITY\SYSTEM privileges via a DeviceIoControl.
UpdatedThe XML parser used in ConeXware PowerArchiver before 20.10.02 allows processing of external entities, which might lead to exfiltration of local files over the network (via an XXE attack).
UpdatedAn issue was discovered in Envoy through 1.71.1. There is a remotely exploitable NULL pointer dereference and crash in TLS when an unknown TLS alert code is received.
UpdatedAn issue was discovered in Envoy through 1.71.1. There is a remotely exploitable integer overflow in which a very large grpc-timeout value leads to unexpected timeout calculations.
UpdatedPion WebRTC before 3.0.15 didn't properly tear down the DTLS Connection when certificate verification failed. The PeerConnectionState was set to failed, but a user could ignore that and continue to use the PeerConnection. )A WebRTC implementation shouldn't allow the user to continue if verification has failed.)
UpdatedThe devise_masquerade gem before 1.3 allows certain attacks when a password's salt is unknown. An application that uses this gem to let administrators masquerade/impersonate users loses one layer of security protection compared to a situation where Devise (without this extension) is used. If the server-side secret_key_base value became publicly known (for instance if it is committed to a public re
UpdatedAn issue was discovered in Pillow before 8.2.0. For BLP data, BlpImagePlugin did not properly check that reads (after jumping to file offsets) returned data. This could lead to a DoS where the decoder could be run a large number of times on empty data.
UpdatedAn issue was discovered in Pillow before 8.2.0. For EPS data, the readline implementation used in EPSImageFile has to deal with any combination of \r and \n as line endings. It used an accidentally quadratic method of accumulating lines while looking for a line ending. A malicious EPS file could use this to perform a DoS of Pillow in the open phase, before an image was accepted for opening.
UpdatedAn issue was discovered in Pillow before 8.2.0. For FLI data, FliDecode did not properly check that the block advance was non-zero, potentially leading to an infinite loop on load.
UpdatedAn issue was discovered in Pillow before 8.2.0. PSDImagePlugin.PsdImageFile lacked a sanity check on the number of input layers relative to the size of the data block. This could lead to a DoS on Image.open prior to Image.load.
UpdatedThe node management page in SolarWinds Orion Platform before 2020.2.5 HF1 allows an attacker to create or delete a node (outside of the attacker's perimeter) via an account with write permissions. This occurs because node IDs are predictable (with incrementing numbers) and the access control on Services/NodeManagement.asmx/DeleteObjNow is incorrect. To exploit this, an attacker must be authenticat
UpdatedXerox Phaser 6510 before 64.61.23 and 64.59.11 (Bridge), WorkCentre 6515 before 65.61.23 and 65.59.11 (Bridge), VersaLink B400 before 37.61.23 and 37.59.01 (Bridge), B405 before 38.61.23 and 38.59.01 (Bridge), B600/B610 before 32.61.23 and 32.59.01 (Bridge), B605/B615 before 33.61.23 and 33.59.01 (Bridge), B7025/30/35 before 58.61.23 and 58.59.11 (Bridge), C400 before 67.61.23 and 67.59.01 (Bridge
UpdatedXerox Phaser 6510 before 64.65.51 and 64.59.11 (Bridge), WorkCentre 6515 before 65.65.51 and 65.59.11 (Bridge), VersaLink B400 before 37.65.51 and 37.59.01 (Bridge), B405 before 38.65.51 and 38.59.01 (Bridge), B600/B610 before 32.65.51 and 32.59.01 (Bridge), B605/B615 before 33.65.51 and 33.59.01 (Bridge), B7025/30/35 before 58.65.51 and 58.59.11 (Bridge), C400 before 67.65.51 and 67.59.01 (Bridge
UpdatedXerox Phaser 6510 before 64.65.51 and 64.59.11 (Bridge), WorkCentre 6515 before 65.65.51 and 65.59.11 (Bridge), VersaLink B400 before 37.65.51 and 37.59.01 (Bridge), B405 before 38.65.51 and 38.59.01 (Bridge), B600/B610 before 32.65.51 and 32.59.01 (Bridge), B605/B615 before 33.65.51 and 33.59.01 (Bridge), B7025/30/35 before 58.65.51 and 58.59.11 (Bridge), C400 before 67.65.51 and 67.59.01 (Bridge
UpdatedXerox AltaLink B8045/B8090 before 103.008.030.32000, C8030/C8035 before 103.001.030.32000, C8045/C8055 before 103.002.030.32000 and C8070 before 103.003.030.32000 allow unauthorized users, by leveraging the Scan To Mailbox feature, to delete arbitrary files from the disk.
UpdatedXerox AltaLink B80xx before 103.008.020.23120, C8030/C8035 before 103.001.020.23120, C8045/C8055 before 103.002.020.23120 and C8070 before 103.003.020.23120 provide the ability to set configuration attributes without administrative rights.
UpdatedXerox AltaLink B80xx before 103.008.020.23120, C8030/C8035 before 103.001.020.23120, C8045/C8055 before 103.002.020.23120 and C8070 before 103.003.020.23120 has several SQL injection vulnerabilities.
UpdatedStackStorm before 3.4.1, in some situations, has an infinite loop that consumes all available memory and disk space. This can occur if Python 3.x is used, the locale is not utf-8, and there is an attempt to log Unicode data (from an action or rule name).
UpdatedStormshield SNS with versions before 3.7.18, 3.11.6 and 4.1.6 has a memory-management defect in the SNMP plugin that can lead to excessive consumption of memory and CPU resources, and possibly a denial of service.
UpdatedThe Arm Mali GPU kernel driver allows privilege escalation or a denial of service (memory corruption) because an unprivileged user can achieve read/write access to read-only pages. This affects Bifrost r0p0 through r29p0 before r30p0, Valhall r19p0 through r29p0 before r30p0, and Midgard r8p0 through r30p0 before r31p0.
UpdatedThe Arm Mali GPU kernel driver allows privilege escalation or information disclosure because GPU memory operations are mishandled, leading to a use-after-free. This affects Bifrost r0p0 through r28p0 before r29p0, Valhall r19p0 through r28p0 before r29p0, and Midgard r4p0 through r30p0.
UpdatedAn issue was discovered in Squid 4.x before 4.15 and 5.x before 5.0.6. If a remote server sends a certain response header over HTTP or HTTPS, there is a denial of service. This header can plausibly occur in benign network traffic.
UpdatedDefault SilverStripe GraphQL Server (aka silverstripe/graphql) 3.x through 3.4.1 permission checker not inherited by query subclass.
Updatedrtw_wx_set_scan in drivers/staging/rtl8188eu/os_dep/ioctl_linux.c in the Linux kernel through 5.11.6 allows writing beyond the end of the ->ssid[] array. NOTE: from the perspective of kernel.org releases, CVE IDs are not normally used for drivers/staging/* (unfinished work); however, system integrators may have situations in which a drivers/staging issue is relevant to their own customer base.
UpdatedIn Django 2.2 before 2.2.20, 3.0 before 3.0.14, and 3.1 before 3.1.8, MultiPartParser allowed directory traversal via uploaded files with suitably crafted file names. Built-in upload handlers were not affected by this vulnerability.
UpdatedA carefully crafted or corrupt file may trigger an infinite loop in Tika's MP3Parser up to and including Tika 1.25. Apache Tika users should upgrade to 1.26 or later.
UpdatedCross-Site Request Forgery (CSRF) vulnerability in Credential page of Apache Zeppelin allows an attacker to submit malicious request. This issue affects Apache Zeppelin Apache Zeppelin version 0.9.0 and prior versions.
UpdatedThe improper Input Validation vulnerability in "”Move folder to Trash” feature of Apache Zeppelin allows an attacker to delete the arbitrary files. This issue affects Apache Zeppelin Apache Zeppelin version 0.9.0 and prior versions.
UpdatedThe iOS and macOS apps before 1.4.1 for the Western Digital G-Technology ArmorLock NVMe SSD store keys insecurely. They choose a non-preferred storage mechanism if the device has Secure Enclave support but lacks biometric authentication hardware.
UpdatedAn issue was discovered in Squid before 4.15 and 5.x before 5.0.6. Due to incorrect parser validation, it allows a Denial of Service attack against the Cache Manager API. This allows a trusted client to trigger memory leaks that. over time, lead to a Denial of Service via an unspecified short query string. This attack is limited to clients with Cache Manager API access privilege.
UpdatedAn issue was discovered in Squid before 4.15 and 5.x before 5.0.6. Due to a buffer-management bug, it allows a denial of service. When resolving a request with the urn: scheme, the parser leaks a small amount of memory. However, there is an unspecified attack methodology that can easily trigger a large amount of memory consumption.
Updatedautoar-extractor.c in GNOME gnome-autoar before 0.3.1, as used by GNOME Shell, Nautilus, and other software, allows Directory Traversal during extraction because it lacks a check of whether a file's parent is a symlink in certain complex situations. NOTE: this issue exists because of an incomplete fix for CVE-2020-36241.
UpdatedAn incorrect permission vulnerability in the product installer for Trend Micro HouseCall for Home Networks version 5.3.1179 and below could allow an attacker to escalate privileges by placing arbitrary code on a specified folder and have that code be executed by an Administrator who is running a scan. Please note that an attacker must first obtain the ability to execute low-privileged code on the
UpdatedTrend Micro Antivirus for Mac 2020 v10.5 and 2021 v11 (Consumer) is vulnerable to an improper access control privilege escalation vulnerability that could allow an attacker to establish a connection that could lead to full local privilege escalation within the application. Please note that an attacker must first obtain the ability to execute low-privileged code on the target system to exploit this
UpdatedTrend Micro Password Manager version 5 (Consumer) is vulnerable to a DLL Hijacking vulnerability which could allow an attacker to inject a malicious DLL file during the installation progress and could execute a malicious program each time a user installs a program.
UpdatedAn insecure file permissions vulnerability in Trend Micro Apex One, Apex One as a Service and OfficeScan XG SP1 could allow a local attacker to take control of a specific log file on affected installations.
UpdatedAn incorrect permission assignment vulnerability in Trend Micro Apex One, Apex One as a Service and OfficeScan XG SP1 could allow a local attacker to escalate privileges on affected installations. Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability.
UpdatedAcrobat Reader DC versions 2021.005.20054 (and earlier), 2020.004.30005 (and earlier) and 2017.011.30197 (and earlier) are affected by a Path traversal vulnerability. An unauthenticated attacker could leverage this vulnerability to achieve arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.
UpdatedAcrobat Reader DC versions 2021.005.20054 (and earlier), 2020.004.30005 (and earlier) and 2017.011.30197 (and earlier) are affected by a Type Confusion vulnerability. An unauthenticated attacker could leverage this vulnerability to disclose sensitive memory information in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious fi
Updated- CVE-2021-28642: Adobe Acrobat Pro DC Out-of-Bounds Write Arbitrary Code Execution Vulnerability 8.8 High
Acrobat Reader DC versions 2021.005.20054 (and earlier), 2020.004.30005 (and earlier) and 2017.011.30197 (and earlier) are affected by an Out-of-bounds write vulnerability. An unauthenticated attacker could leverage this vulnerability to achieve arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious f
Updated Acrobat Reader DC versions 2021.005.20054 (and earlier), 2020.004.30005 (and earlier) and 2017.011.30197 (and earlier) are affected by an Use-after-free vulnerability. An unauthenticated attacker could leverage this vulnerability to achieve arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.
UpdatedAcrobat Reader DC versions 2021.005.20054 (and earlier), 2020.004.30005 (and earlier) and 2017.011.30197 (and earlier) are affected by an Use-after-free vulnerability. An authenticated attacker could leverage this vulnerability to achieve arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.
Updated- CVE-2021-28639: Adobe Acrobat Reader DC setAction Use-After-Free Remote Code Execution Vulnerability 7.8 High
Acrobat Reader DC versions 2021.005.20054 (and earlier), 2020.004.30005 (and earlier) and 2017.011.30197 (and earlier) are affected by an Use-after-free vulnerability. An unauthenticated attacker could leverage this vulnerability to achieve arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.
Updated Acrobat Reader DC versions 2021.005.20054 (and earlier), 2020.004.30005 (and earlier) and 2017.011.30197 (and earlier) are affected by a Heap-based Buffer overflow vulnerability. An unauthenticated attacker could leverage this vulnerability to achieve arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malic
Updated