CVE-2017-14xxx records
Browse official CVE Program records with vulnerability descriptions, affected products, CVSS scores and source references. Browse by the year and numeric range in each CVE ID; publication and update dates appear on each record.
900 records · Page 9 of 9
In the EyesOfNetwork web interface (aka eonweb) 5.1-0, module\tool_all\tools\interface.php does not properly restrict exec calls, which allows remote attackers to execute arbitrary commands via shell metacharacters in the host_list parameter to module/tool_all/select_tool.php.
UpdatedThe AT&T U-verse 9.2.2h0d83 firmware for the Arris NVG589 and NVG599 devices, when IP Passthrough mode is not used, configures an unauthenticated proxy service on WAN TCP port 49152, which allows remote attackers to establish arbitrary TCP connections to intranet hosts by sending \x2a\xce\x01 followed by other predictable values.
UpdatedThe AT&T U-verse 9.2.2h0d83 firmware for the Arris NVG599 device, when IP Passthrough mode is not used, configures WAN access to a caserver https service with the tech account and an empty password, which allows remote attackers to obtain root privileges by establishing a session on port 49955 and then installing new software, such as BusyBox with "nc -l" support.
UpdatedThe AT&T U-verse 9.2.2h0d83 firmware for the Arris NVG589 and NVG599 devices, when IP Passthrough mode is not used, configures ssh-permanent-enable WAN SSH logins to the remotessh account with the 5SaP9I26 password, which allows remote attackers to access a "Terminal shell v1.0" service, and subsequently obtain unrestricted root privileges, by establishing an SSH session and then entering certain
UpdatedRTPproxy through 2.2.alpha.20160822 has a NAT feature that results in not properly determining the IP address and port number of the legitimate recipient of RTP traffic, which allows remote attackers to obtain sensitive information or cause a denial of service (communication outage) via crafted RTP packets.
UpdatedDO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: CVE-2017-13067. Reason: This candidate is a reservation duplicate of CVE-2017-13067. Notes: All CVE users should reference CVE-2017-13067 instead of this candidate. All references and descriptions in this candidate have been removed to prevent accidental usage
Updated · Rejected recordThe workstation logging function in Philips IntelliSpace Cardiovascular (ISCV) 2.3.0 and earlier and Xcelera R4.1L1 and earlier records domain authentication credentials, which if accessed allows an attacker to use credentials to access the application, or other user entitlements.
Updatedlibgedit.a in GNOME gedit through 3.22.1 allows remote attackers to cause a denial of service (CPU consumption) via a file that begins with many '\0' characters.
UpdatedThe _zip_read_eocd64 function in zip_open.c in libzip before 1.3.0 mishandles EOCD records, which allows remote attackers to cause a denial of service (memory allocation failure in _zip_cdir_grow in zip_dirent.c) via a crafted ZIP archive.
UpdatedThe tcp_disconnect function in net/ipv4/tcp.c in the Linux kernel before 4.12 allows local users to cause a denial of service (__tcp_select_window divide-by-zero error and system crash) by triggering a disconnect within a certain tcp_recvmsg code path.
UpdatedHiveManager Classic through 8.1r1 allows arbitrary JSP code execution by modifying a backup archive before a restore, because the restore feature does not validate pathnames within the archive. An authenticated, local attacker - even restricted as a tenant - can add a jsp at HiveManager/tomcat/webapps/hm/domains/$yourtenant/maps (it will be exposed at the web interface).
UpdatedThe ReadJNGImage and ReadOneJNGImage functions in coders/png.c in GraphicsMagick 1.3.26 do not properly manage image pointers after certain error conditions, which allows remote attackers to conduct use-after-free attacks via a crafted file, related to a ReadMNGImage out-of-order CloseBlob call. NOTE: this vulnerability exists because of an incomplete fix for CVE-2017-11403.
UpdatedMIMEDefang 2.80 and earlier creates a PID file after dropping privileges to a non-root account, which might allow local users to kill arbitrary processes by leveraging access to this non-root account for PID file modification before a root script executes a "kill `cat /pathname`" command, as demonstrated by the init-script.in and mimedefang-init.in scripts.
UpdatedA security researcher found an XML External Entity (XXE) vulnerability on the Conserus Image Repository archive solution version 2.1.1.105 by McKesson Medical Imaging Company, which is now a Change Healthcare company. An unauthenticated user supplying a modified HTTP SOAP request to the vulnerable service allows for arbitrary file read access to the local file system as well as the transmittal of
UpdatedIn Asterisk 11.x before 11.25.2, 13.x before 13.17.1, and 14.x before 14.6.1 and Certified Asterisk 11.x before 11.6-cert17 and 13.x before 13.13-cert5, unauthorized command execution is possible. The app_minivm module has an "externnotify" program configuration option that is executed by the MinivmNotify dialplan application. The application uses the caller-id name and number as part of a built s
UpdatedIn res/res_rtp_asterisk.c in Asterisk 11.x before 11.25.2, 13.x before 13.17.1, and 14.x before 14.6.1 and Certified Asterisk 11.x before 11.6-cert17 and 13.x before 13.13-cert5, unauthorized data disclosure (media takeover in the RTP stack) is possible with careful timing by an attacker. The "strictrtp" option in rtp.conf enables a feature of the RTP stack that learns the source address of media
UpdatedIn the pjsip channel driver (res_pjsip) in Asterisk 13.x before 13.17.1 and 14.x before 14.6.1, a carefully crafted tel URI in a From, To, or Contact header could cause Asterisk to crash.
UpdatedAn improper access control vulnerability in Trend Micro Smart Protection Server (Standalone) versions 3.2 and below could allow an attacker to decrypt contents of a database with information that could be used to access a vulnerable system.
UpdatedA stored cross site scripting (XSS) vulnerability in Trend Micro Smart Protection Server (Standalone) versions 3.2 and below could allow an attacker to execute a malicious payload on vulnerable systems.
UpdatedA vulnerability in Trend Micro Smart Protection Server (Standalone) versions 3.2 and below could allow an attacker to perform remote command execution via a local file inclusion on a vulnerable system.
UpdatedA vulnerability in Trend Micro Smart Protection Server (Standalone) versions 3.2 and below could allow an attacker to perform remote command execution via a cron job injection on a vulnerable system.
UpdatedThe Log Query and Quarantine Query pages in Trend Micro ScanMail for Exchange 12.0 are vulnerable to cross site scripting (XSS) attacks.
UpdatedThe absence of Anti-CSRF tokens in Trend Micro ScanMail for Exchange 12.0 web interface forms could allow an attacker to submit authenticated requests when an authenticated user browses an attacker-controlled domain.
UpdatedA vulnerability in Trend Micro ScanMail for Exchange 12.0 exists in which certain specific installations that utilize a uncommon feature - Other Update Sources - could be exploited to overwrite sensitive files in the ScanMail for Exchange directory.
UpdatedA vulnerability in Trend Micro ScanMail for Exchange 12.0 exists in which some communications to the update servers are not encrypted.
UpdatedAn Unauthorized Memory Corruption vulnerability in Trend Micro OfficeScan 11.0 and XG may allow remote unauthenticated users who can access the OfficeScan server to target cgiShowClientAdm.exe and cause memory corruption issues.
UpdatedMemory Corruption Privilege Escalation vulnerabilities in Trend Micro OfficeScan 11.0 and XG allows local attackers to execute arbitrary code and escalate privileges to resources normally reserved for the kernel on vulnerable installations by exploiting tmwfp.sys. An attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit the vulnerability.
UpdatedA Host Header Injection vulnerability in Trend Micro OfficeScan XG (12.0) may allow an attacker to spoof a particular Host header, allowing the attacker to render arbitrary links that point to a malicious website with poisoned Host header webpages.
UpdatedPre-authorization Start Remote Process vulnerabilities in Trend Micro OfficeScan 11.0 and XG may allow unauthenticated users who can access the OfficeScan server to start the fcgiOfcDDA.exe executable or cause a potential INI corruption, which may cause the server disk space to be consumed with dump files from continuous HTTP requests.
UpdatedInformation disclosure vulnerabilities in Trend Micro OfficeScan 11.0 and XG may allow unauthenticated users who can access the OfficeScan server to query the network's NT domain or the PHP version and modules.
UpdatedA potential Man-in-the-Middle (MitM) attack vulnerability in Trend Micro OfficeScan 11.0 and XG may allow attackers to execute arbitrary code on vulnerable installations.
UpdatedA vulnerability in Trend Micro OfficeScan 11.0 and XG allows remote unauthenticated users who can access the system to download the OfficeScan encryption file.
UpdatedAn uninitialized pointer information disclosure vulnerability in Trend Micro Mobile Security (Enterprise) versions 9.7 and below could allow an unauthenticated remote attacker to disclosure sensitive information on a vulnerable system.
UpdatedProxy command injection vulnerabilities in Trend Micro Mobile Security (Enterprise) versions before 9.7 Patch 3 allow remote attackers to execute arbitrary code on vulnerable installations.
UpdatedAuthentication bypass vulnerability in Trend Micro Mobile Security (Enterprise) versions before 9.7 Patch 3 allows attackers to access a specific part of the console using a blank password.
UpdatedUnrestricted file uploads in Trend Micro Mobile Security (Enterprise) versions before 9.7 Patch 3 allow remote attackers to execute arbitrary code on vulnerable installations.
UpdatedSQL Injection vulnerabilities in Trend Micro Mobile Security (Enterprise) versions before 9.7 Patch 3 allow remote attackers to execute arbitrary code on vulnerable installations.
UpdatedHTML Injection in Securimage 3.6.4 and earlier allows remote attackers to inject arbitrary HTML into an e-mail message body via the $_SERVER['HTTP_USER_AGENT'] parameter to example_form.ajax.php or example_form.php.
UpdatedSQL Injection exists in NexusPHP 1.5.beta5.20120707 via the id parameter to linksmanage.php in an editlink action.
UpdatedThis vulnerability allows local attackers to escalate privileges on Jungo WinDriver 12.4.0 and earlier. An attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. The specific flaw exists within the processing of IOCTL 0x953824a7 by the windrvr1240 kernel driver. The issue lies in the failure to properly validate user-suppl
UpdatedCross Site Scripting (XSS) exists in NexusPHP 1.5.beta5.20120707 via the PATH_INFO to ipsearch.php, related to PHP_SELF.
UpdatedSQL Injection exists in NexusPHP 1.5.beta5.20120707 via the usernw array parameter to nowarn.php.
UpdatedRuby through 2.2.7, 2.3.x through 2.3.4, and 2.4.x through 2.4.1 can expose arbitrary memory during a JSON.generate call. The issues lies in using strdup in ext/json/ext/generator/generator.c, which will stop after encountering a '\0' byte, returning a pointer to a string of length zero, which is not the length stored in space_len.
UpdatedAsync Http Client (aka async-http-client) before 2.0.35 can be tricked into connecting to a host different from the one extracted by java.net.URI if a '?' character occurs in a fragment identifier. Similar bugs were previously identified in cURL (CVE-2016-8624) and Oracle Java 8 java.net.URL.
UpdatedInteger overflow in the decode_digit function in puny_decode.c in Libidn2 before 2.0.4 allows remote attackers to cause a denial of service or possibly have unspecified other impact.
UpdatedInteger overflow in the _isBidi function in bidi.c in Libidn2 before 2.0.4 allows remote attackers to cause a denial of service or possibly have unspecified other impact.
UpdatedIn ImageMagick 7.0.6-10, a NULL Pointer Dereference issue is present in the ReadCUTImage function in coders/cut.c that could allow an attacker to cause a Denial of Service (in the QueueAuthenticPixelCacheNexus function within the MagickCore/cache.c file) by submitting a malformed image file.
UpdatedIn FFmpeg 3.3.3, a DoS in cine_read_header() due to lack of an EOF check might cause huge CPU and memory consumption. When a crafted CINE file, which claims a large "duration" field in the header but does not contain sufficient backing data, is provided, the image-offset parsing loop would consume huge CPU and memory resources, since there is no EOF check inside the loop.
UpdatedIn FFmpeg 2.4 and 3.3.3, the read_data function in libavformat/hls.c does not restrict reload attempts for an insufficient list, which allows remote attackers to cause a denial of service (infinite loop).
UpdatedIn FFmpeg 3.3.3, a DoS in asf_read_marker() due to lack of an EOF (End of File) check might cause huge CPU and memory consumption. When a crafted ASF file, which claims a large "name_len" or "count" field in the header but does not contain sufficient backing data, is provided, the loops over the name and markers would consume huge CPU and memory resources, since there is no EOF check inside these
UpdatedIn libavformat/rl2.c in FFmpeg 3.3.3, a DoS in rl2_read_header() due to lack of an EOF (End of File) check might cause huge CPU and memory consumption. When a crafted RL2 file, which claims a large "frame_count" field in the header but does not contain sufficient backing data, is provided, the loops (for offset and size tables) would consume huge CPU and memory resources, since there is no EOF che
UpdatedIn libavformat/mvdec.c in FFmpeg 3.3.3, a DoS in mv_read_header() due to lack of an EOF (End of File) check might cause huge CPU and memory consumption. When a crafted MV file, which claims a large "nb_frames" field in the header but does not contain sufficient backing data, is provided, the loop over the frames would consume huge CPU and memory resources, since there is no EOF check inside the lo
UpdatedIn libavformat/rmdec.c in FFmpeg 3.3.3, a DoS in ivr_read_header() due to lack of an EOF (End of File) check might cause huge CPU consumption. When a crafted IVR file, which claims a large "len" field in the header but does not contain sufficient backing data, is provided, the first type==4 loop would consume huge CPU resources, since there is no EOF check inside the loop.
UpdatedNetApp OnCommand Unified Manager for Clustered Data ONTAP before 7.2P1 does not set the secure flag for an unspecified cookie in an HTTPS session, which makes it easier for remote attackers to capture this cookie by intercepting its transmission within an HTTP session.
UpdatedAn integer overflow in the qla2x00_sysfs_write_optrom_ctl function in drivers/scsi/qla2xxx/qla_attr.c in the Linux kernel through 4.12.10 allows local users to cause a denial of service (memory corruption and system crash) by leveraging root access.
UpdatedIn BlackCat CMS 1.2, backend/addons/install.php allows remote authenticated users to execute arbitrary PHP code via a ZIP archive that contains a .php file.
UpdatedIn BlackCat CMS 1.2, backend/settings/ajax_save_settings.php allows remote authenticated users to conduct XSS attacks via the Website header or Website footer field.
UpdatedBlackCat CMS 1.2 allows remote authenticated users to inject arbitrary PHP code into info.php via a crafted new_modulename parameter to backend/addons/ajax_create.php. NOTE: this can be exploited via CSRF.
UpdatedA memory allocation failure was discovered in the ReadPNMImage function in coders/pnm.c in GraphicsMagick 1.3.26. The vulnerability causes a big memory allocation, which may lead to remote denial of service in the MagickRealloc function in magick/memory.c.
UpdatedA stack-based buffer overflow was discovered in the pgxtoimage function in bin/jp2/convert.c in OpenJPEG 2.2.0. The vulnerability causes an out-of-bounds write, which may lead to remote denial of service or possibly remote code execution.
UpdatedAn invalid write access was discovered in bin/jp2/convert.c in OpenJPEG 2.2.0, triggering a crash in the tgatoimage function. The vulnerability may lead to remote denial of service or possibly unspecified other impact.
UpdatedA heap-based buffer overflow was discovered in the opj_t2_encode_packet function in lib/openjp2/t2.c in OpenJPEG 2.2.0. The vulnerability causes an out-of-bounds write, which may lead to remote denial of service or possibly unspecified other impact.
UpdatedCrushFTP before 7.8.0 and 8.x before 8.2.0 has a redirect vulnerability.
Updated- CVE-2017-14037: CrushFTP before 7.8.0 and 8.x before 8.2.0 has an HTTP header vulnerability. Unscored
CrushFTP before 7.8.0 and 8.x before 8.2.0 has an HTTP header vulnerability.
Updated CrushFTP before 7.8.0 and 8.x before 8.2.0 has XSS.
UpdatedCrushFTP 8.x before 8.2.0 has a serialization vulnerability.
UpdatedThe restore_tqb_pixels function in hevc_filter.c in libavcodec, as used in libbpg 0.9.7 and other products, miscalculates a memcpy destination address, which allows remote attackers to cause a denial of service (heap-based buffer over-read and application crash) or possibly have unspecified other impact.
UpdatedThe decode method in the OpenSSL::ASN1 module in Ruby before 2.2.8, 2.3.x before 2.3.5, and 2.4.x through 2.4.1 allows attackers to cause a denial of service (interpreter crash) via a crafted string.
UpdatedARM mbed TLS before 1.3.21 and 2.x before 2.1.9, if optional authentication is configured, allows remote attackers to bypass peer authentication via an X.509 certificate chain with many intermediates. NOTE: although mbed TLS was formerly known as PolarSSL, the releases shipped with the PolarSSL name are not affected.
UpdatedAn Improper Access Control issue was discovered in Trihedral VTScada 11.3.03 and prior. A local, non-administrator user has privileges to read and write to the file system of the target machine.
UpdatedAn issue was discovered in Moxa MXview v2.8 and prior. The unquoted service path escalation vulnerability could allow an authorized user with file access to escalate privileges by inserting arbitrary code into the unquoted service path.
UpdatedAn Uncontrolled Search Path Element issue was discovered in Trihedral VTScada 11.3.03 and prior. The program will execute specially crafted malicious dll files placed on the target machine.
UpdatedA Resource Exhaustion issue was discovered in Moxa NPort 5110 Version 2.2, NPort 5110 Version 2.4, NPort 5110 Version 2.6, NPort 5110 Version 2.7, NPort 5130 Version 3.7 and prior, and NPort 5150 Version 3.7 and prior. An attacker may be able to exhaust memory resources by sending a large amount of TCP SYN packets.
UpdatedA Use of Hard-coded Credentials issue was discovered in Korenix JetNet JetNet5018G version 1.4, JetNet5310G version 1.4a, JetNet5428G-2G-2FX version 1.4, JetNet5628G-R version 1.4, JetNet5628G version 1.4, JetNet5728G-24P version 1.4, JetNet5828G version 1.1d, JetNet6710G-HVDC version 1.1e, and JetNet6710G version 1.1. The software uses undocumented hard-coded credentials that may allow an attacke
UpdatedIn Ice Qube Thermal Management Center versions prior to version 4.13, the web application does not properly authenticate users which may allow an attacker to gain access to sensitive information.
UpdatedAn Improper Input Validation issue was discovered in ABB FOX515T release 1.0. An improper input validation vulnerability has been identified, allowing a local attacker to provide a malicious parameter to the script that is not validated by the application, This could enable the attacker to retrieve any file on the server.
UpdatedA Stack-based Buffer Overflow issue was discovered in Schneider Electric InduSoft Web Studio v8.0 SP2 Patch 1 and prior versions, and InTouch Machine Edition v8.0 SP2 Patch 1 and prior versions. The stack-based buffer overflow vulnerability has been identified, which may allow remote code execution with high privileges.
UpdatedAn Improper Input Validation issue was discovered in Siemens SIMATIC PCS 7 V8.1 prior to V8.1 SP1 with WinCC V7.3 Upd 13, and V8.2 all versions. The improper input validation vulnerability has been identified, which may allow an authenticated remote attacker who is a member of the administrators group to crash services by sending specially crafted messages to the DCOM interface.
UpdatedAn Improper Input Validation issue was discovered in Rockwell Automation FactoryTalk Alarms and Events, Version 2.90 and earlier. An unauthenticated attacker with remote access to a network with FactoryTalk Alarms and Events can send a specially crafted set of packets packet to Port 403/TCP (the history archiver service), causing the service to either stall or terminate.
UpdatedA Use of Hard-coded Cryptographic Key issue was discovered in Korenix JetNet JetNet5018G version 1.4, JetNet5310G version 1.4a, JetNet5428G-2G-2FX version 1.4, JetNet5628G-R version 1.4, JetNet5628G version 1.4, JetNet5728G-24P version 1.4, JetNet5828G version 1.1d, JetNet6710G-HVDC version 1.1e, and JetNet6710G version 1.1. An attacker may gain access to hard-coded certificates and private keys a
UpdatedIn AutomationDirect CLICK Programming Software (Part Number C0-PGMSW) Versions 2.10 and prior; C-More Programming Software (Part Number EA9-PGMSW) Versions 6.30 and prior; C-More Micro (Part Number EA-PGMSW) Versions 4.20.01.0 and prior; Do-more Designer Software (Part Number DM-PGMSW) Versions 2.0.3 and prior; GS Drives Configuration Software (Part Number GSOFT) Versions 4.0.6 and prior; SL-SOFT
UpdatedAn Unquoted Search Path or Element issue was discovered in Progea Movicon Version 11.5.1181 and prior. An unquoted search path or element vulnerability has been identified, which may allow an authorized local user to insert arbitrary code into the unquoted service path and escalate his or her privileges.
UpdatedAn improper authentication issue was discovered in Johnson & Johnson Ethicon Endo-Surgery Generator Gen11, all versions released before November 29, 2017. The security authentication mechanism used between the Ethicon Endo-Surgery Generator Gen11 and single-patient use products can be bypassed, allowing for unauthorized devices to be connected to the generator, which could result in a loss of inte
UpdatedAn Uncontrolled Search Path Element issue was discovered in Progea Movicon Version 11.5.1181 and prior. An uncontrolled search path element vulnerability has been identified, which may allow a remote attacker without privileges to execute arbitrary code in the form of a malicious DLL file.
UpdatedA Stack-based Buffer Overflow issue was discovered in Advantech WebAccess versions prior to V8.2_20170817. The application lacks proper validation of the length of user-supplied data prior to copying it to a stack-based buffer, which could allow an attacker to execute arbitrary code under the context of the process.
UpdatedBoston Scientific ZOOM LATITUDE PRM Model 3120 uses a hard-coded cryptographic key to encrypt PHI prior to having it transferred to removable media. CVSS v3 base score: 4.6; CVSS vector string: AV:P/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N.
UpdatedA Client-Side Enforcement of Server-Side Security issue was discovered in ProMinent MultiFLEX M10a Controller web interface. The log out function in the application removes the user's session only on the client side. This may allow an attacker to bypass protection mechanisms, gain privileges, or assume the identity of an authenticated user.
UpdatedBoston Scientific ZOOM LATITUDE PRM Model 3120 does not encrypt PHI at rest. CVSS v3 base score: 4.6; CVSS vector string: AV:P/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N.
UpdatedA Cross-Site Request Forgery issue was discovered in ProMinent MultiFLEX M10a Controller web interface. The application does not sufficiently verify requests, making it susceptible to cross-site request forgery. This may allow an attacker to execute unauthorized code, resulting in changes to the configuration of the device.
UpdatedIn SpiderControl MicroBrowser Windows XP, Vista 7, 8 and 10, Versions 1.6.30.144 and prior, an uncontrolled search path element vulnerability has been identified which could be exploited by placing a specially crafted DLL file in the search path. If the malicious DLL is loaded prior to the valid DLL, an attacker could execute arbitrary code on the system.
UpdatedAn Information Exposure issue was discovered in ProMinent MultiFLEX M10a Controller web interface. When an authenticated user uses the Change Password feature on the application, the current password for the user is specified in plaintext. This may allow an attacker who has been authenticated to gain access to the password.
UpdatedGE Centricity PACS RA1000, diagnostic image analysis, all current versions are affected these devices use default or hard-coded credentials. Successful exploitation of this vulnerability may allow a remote attacker to bypass authentication and gain access to the affected devices.
UpdatedAn Insufficient Session Expiration issue was discovered in ProMinent MultiFLEX M10a Controller web interface. The user's session is available for an extended period beyond the last activity, allowing an attacker to reuse an old session for authorization.
UpdatedGE Xeleris versions 1.0,1.1,2.1,3.0,3.1, medical imaging systems, all current versions are affected, these devices use default or hard-coded credentials. Successful exploitation of this vulnerability may allow a remote attacker to bypass authentication and gain access to the affected devices.
UpdatedAn Unverified Password Change issue was discovered in ProMinent MultiFLEX M10a Controller web interface. When setting a new password for a user, the application does not require the user to know the original password. An attacker who is authenticated could change a user's password, enabling future access and possible configuration changes.
UpdatedGE GEMNet License server (EchoServer) all current versions are affected these devices use default or hard-coded credentials. Successful exploitation of this vulnerability may allow a remote attacker to bypass authentication and gain access to the affected devices.
UpdatedAn Authentication Bypass by Spoofing issue was discovered in LAVA Ether-Serial Link (ESL) running firmware versions 6.01.00/29.03.2007 and prior versions. An improper authentication vulnerability has been identified, which, if exploited, would allow an attacker with the same IP address to bypass authentication by accessing a specific uniform resource locator.
UpdatedGE Infinia/Infinia with Hawkeye 4 medical imaging systems all current versions are affected these devices use default or hard-coded credentials. Successful exploitation of this vulnerability may allow a remote attacker to bypass authentication and gain access to the affected devices.
UpdatedAn Improper Neutralization of Special Elements used in an OS Command issue was discovered in Digium Asterisk GUI 2.1.0 and prior. An OS command injection vulnerability has been identified that may allow the execution of arbitrary code on the system through the inclusion of OS commands in the URL request of the program.
UpdatedAn Improper Authentication issue was discovered in Ctek SkyRouter Series 4200 and 4400, all versions prior to V6.00.11. By accessing a specific uniform resource locator (URL) on the web server, a malicious user is able to access the application without authenticating.
Updated